- Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
- Drive Tires 23 x 9.50-12, 4 ply Super Turf®
- Front Caster Tires 13 x 5.0-6, smooth-tread, semi-pneumatic.
- Caster Forks .50" thick caster yoke arms.
- Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Parking Brake Lever-actuated disc brake.
- Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.
- Electrical 12-volt battery with 15-amp alternator.
- Standard Features Engine hour meter and cup holder
- UPC 193308000473
- Engine Brand Kawasaki
- Engine Model FX751V
- Engine Displacement 852
- Engine Series V-Twin
- Engine Speed 3,750 RPM
- Air Filter Heavy-duty canister air filtration system
- Fuel Type Gas Carbureted
- Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
- Fuel Indicator Yes - electronic Sender
- Drive Hydro-Drive
- Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Engine HP* 24.5
- Speed Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
- Carb Compliant Yes
- Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS 2-post foldable ROPS standard with seat belt and latch.
- PTO Engagement MagStop electromagnetic 175-ft-lb clutch with spot brake
- Drive Wheel Release Allows unit movement without engine running.
- Engine Spec AS11
- *The gross horsepower of gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C and the 3TNV86CT was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.
- Width / Cutting Deck 52"
- Deck Style Floating Deck
- Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
- Blade Tip Speed Approximately 18,500 fpm.
- Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
- Blades 3 Blades at 18.00" Length
- Width 64.8 in. (164.6 cm)
- Length 79.2 in. (201.2 cm)
- Height 70.5 in. (179.1 cm)
- Curb Weight 1136
Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.Buy Now
LED Light Kit (not compatible with TC26)
Light KitBuy Now
Hydro Maintenance Kit
Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)Buy Now
The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
Operator Controlled Discharge Gate & Cable Assembly
Operator Controlled Discharge Lever (Foot)
Operator Controlled Discharge Lever (Foot)
12-Volt Power Adapter
Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)Buy Now
Lightweight and easy to attach, this 3-bushel grass catcher fits most riders, stand-ons and wide-area walk-behinds. Adapter kit required for select models.
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.Buy Now
Extended Drive Lever Kit
Improve your elbow room while you operate with extended drive levers.Buy Now
Harness Add-On Accessory Kit
Take the hassle out of dual accessory fit up with this add-on harness. Required for use of more than one electrical accessory.Buy Now
Trash Container (Not compatible with 135-7320)
Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.Buy Now
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).Buy Now
Jack Mount Receiver
Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.
Sun Shade (ROPS)
Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)Buy Now
Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).Buy Now
Power Deck Lift
Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.Buy Now
Air Ride Suspension Seat
Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.Buy Now
Seat Isolation System
Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.Buy Now
Turf Striping Kit
Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.Buy Now
UltraVac Completing Kit
KIT, UV DRIVE 524 SPLINED 850,000 +
UltraVac Quick Dump Collection System
The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.
UltraVac 2-Bag Collection System
Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.